Full 25-point door and opener safety check with every visit - springs, cables, rollers, tracks, and your LiftMaster or Chamberlain opener included
You get a price before we start. It does not change when the truck arrives.
Before
After
Before
After
Before
AfterLiftMaster Torsion Spring Replacement: The Lewisville Owner’s Guide
We stock LiftMaster-compatible torsion springs on our trucks and replace them same-day across Lewisville, typically for $180 to $340 installed. That price includes the spring, the labor, and a quick balance and cycle test before we pull out of your driveway. Most Lewisville homeowners discover the spring failed when they hear what sounds like a gunshot from the garage, then find the door won’t budge even though the opener is running fine.
If you’re reading this with a LiftMaster opener mounted to the ceiling and a door that’s suddenly dead weight, you’ve got a broken torsion spring. It’s not your opener. It’s the spring doing the heavy lifting, and when it snaps, nothing else matters until it’s replaced.
Which LiftMaster Models This Applies To
LiftMaster doesn’t make the springs themselves. The springs on your door are matched to the door’s weight and height, not to the opener model. So whether you’ve got a LiftMaster 8500W wall-mount, an 87504 belt drive, or an older Formula I from the early 2000s, the spring replacement process is the same: we measure the wire gauge, inside diameter, spring length, and wind direction of the broken spring, then build the match.
The compatibility gotcha most Lewisville homeowners don’t know: when a spring breaks, you can’t just measure what’s left and order that length. Torsion springs gain a turn of coil when they snap, so an amateur measuring the broken piece will order a spring that’s one size short. We’ve seen it happen. We count what’s there, add what’s missing, and match the original spec. That’s true for OEM springs and quality aftermarket equivalents from the same manufacturers that supply LiftMaster’s parent company, Chamberlain.
We’re an independent shop. We’re not affiliated with LiftMaster, but we work on their products every week across Lewisville and stock the spring sizes their dealer-installed doors most commonly need.
Signs Your LiftMaster Torsion Spring Replacement Is Failing
Torsion springs don’t fail silently. Here’s what you’ll notice before and after the snap:
- A loud bang from the garage. This is the spring letting go. The sound echoes because all that stored tension releases in a fraction of a second. If you heard it, the spring is done.
- The door won’t open, or opens a few inches and stops. The opener is pulling against hundreds of pounds of dead weight. The motor strains, the belt or chain groans, and the door barely moves because there’s no counterbalance anymore.
- The door closes too fast if you release it. A healthy torsion spring holds the door in place at the halfway point. When the spring is weak or broken, the door drops like a guillotine. That’s a broken cable waiting to happen too.
- A visible gap in the spring coil. When a torsion spring snaps, you’ll see a two-inch separation somewhere along the bar above the door. If you can see it from the floor, that’s your confirmation.
- The opener is straining. Otto says it all the time: if the opener is straining, the problem is almost never the opener. Springs do the work. Openers just point the door in the right direction.
Replacement Cost & What’s Included
LiftMaster torsion spring replacement in Lewisville runs $180 to $340 installed, depending on the spring’s wire gauge, length, and whether you have a single-spring or double-spring setup. A standard 16×7 residential door with a single spring falls on the lower end. A heavier door, a wood door, or a two-spring system pushes toward the upper end.
- Spring replacement: $180-$340
- Spring + cable replacement (common combo): $310-$590
- Spring + roller replacement (we check while we’re up there): $290-$560
- Full spring assembly (both springs on a double-spring door): $320-$680
We quote the price on the phone and it holds when we arrive. No dispatch fee, no surprise line item for “shop supplies,” no upsell pressure. The price covers the spring, labor, lubrication, and a full cycle test. And every job carries our 90-Day Done Right Promise in writing: if it’s not right, Otto comes back and makes it right. One call, no runaround.
DIY or Call Us?
A door is 200 pounds riding on two springs. Respect it. Torsion springs are under total tension even when the door is closed, and the winding bars alone can break a wrist or a jaw if they slip. We don’t say that to scare you. We say it because we’ve seen what happens when a homeowner with a YouTube tutorial and a pair of vise grips tries to save $200.
What you can safely do: check the spring visually for a gap, check the cables for fraying, and call us with the measurements if you want a price before we arrive. What you shouldn’t do: unwind or wind a torsion spring yourself. The tools are cheap. The hospital bill isn’t. We carry the right springs, bars, and a tension gauge on the truck, and we’ll be in and out the same day. Call (945) 777-4998 and we’ll walk you through it.
FAQs
A standard torsion spring is rated for about 10,000 cycles, which for most Lewisville households works out to seven to nine years. In our Texas heat, springs lose their temper a little faster than in cooler climates, so we tell Lewisville homeowners to expect replacement between year six and year eight. High-cycle springs rated for 20,000 or 30,000 cycles cost more upfront and last meaningfully longer. Call (945) 777-4998 and we’ll quote both options.
No. A broken torsion spring cannot be welded, spliced, or re-tensioned. It’s a hardened steel coil that fractured; once the metal separates, the only correct move is a new spring matched to the door’s exact weight. We don’t patch springs because a patched spring fails again and takes a cable or a panel with it. Call (945) 777-4998 for the real fix the first time.
Most LiftMaster torsion spring replacements in Lewisville take about 45 to 60 minutes from arrival to final cycle test. If the cables or rollers need attention while we’re in there, add 20 to 30 minutes. We arrive with the common sizes on the truck, so there’s usually no “we’ll order the part and come back” delay.
Yes. We carry a full range of torsion spring sizes matched to the most common LiftMaster and Chamberlain residential door setups in Lewisville, from light single-car doors to heavy double-spring systems. If your door uses an uncommon spec, we’ll know it from the measurements and bring the exact match same-day. Call (945) 777-4998 and Otto will tell you what’s on the truck before we even head your way.
If you’ve got a broken spring and a LiftMaster door that won’t move, don’t fight it. Call (945) 777-4998. We’ll answer live, quote the job on the phone, and hold that number when we pull up. If I wouldn’t put it on my own door, I’m not putting it on yours.
Written by Otto Reinhardt, Owner, Otto’s Garage Door - Lewisville, TX at Otto’s Garage Door, serving Lewisville and nearby areas.